Videos

Sigma Thermostatic Valves

Eurotherm 3/4" Thermostatic Valves

Unscrewing Screws of Eurotherm 3/4" Valve Cover

Use Lime-A-Away to Clean Valve Cover of Eurotherm 3/4" Thermostatic Valve

Cleaning Eurotherm 3/4" Thermostatic Cartridge

Confirming Hot and Cold Water to Eurotherm 3/4" Valve

Determining Flow Rate of Eurotherm 3/4" Thermostatic Cartridge

Installing Valve Cover of Eurotherm 3/4" Thermostatic Valve

Temperature Calibration of Eurotherm 3/4" Thermostatic Cartridge

Replacing Spout Tip and Aerator

How to Install Cross Handle

Replacing Button on Cross Handle

To replace the button on top of the handle or to replace a cartridge, you will need to remove the existing button with metal ring on top of the faucet handle.

Removing the existing button on top of the faucet handle and replacing it with a new button with metal ring is not obvious. You will need to use rubber gloves with a good grip to unscrew and remove the existing metal ring atop the handle. Then screw on the new button with metal ring. The video below demonstrates how to change the button.

Replacing Cartridge on Faucet with Cross Handle

Using a Socket Wrench to Remove a Cartridge

Highly recommended tool: 17mm socket with long handle.

Replacing Cartridge on a 1/2" Thermostatic Shower Valve

Highly recommended tool: 17mm socket with long handle.

Replacing Simply Safe Thermostatic Valve Cartridge

Highly recommended tool: 17mm socket with long handle.

Increasing Water Volume of Rainhead Shower Head: Removing Flow Restrictor

The Rainhead Shower Head contains a water-saving feature. To increase the water volume of the shower head, remove the water flow restrictor:

1. Unscrew the swivel connector from the shower head.
2. Use a screwdriver to pop out the flow restrictor from inside the swivel connector.
3. Re-attach the swivel connector to the shower head.